SYCON-66 XX SS
SYCON-66 XX SS
This advance version in 66 series with small volume and light weight, displays all parameters like system power factor voltage, current, system KVA, system KVAr, system KW, shortfall KVAr, THD. It works on smart switching algorithm where a number of capacitors can be turned ON or OFF instantaneously used on the capacitive KVAr requirement. It also displays harmonics from 3rd to 13th. It has capability to auto-identify the capacitor values. All the settings are password protected. It has in-built capacitor protection system in case of harmonic overload and over-voltage. With in-built TEST mode, the panel can be tested without CT current.
Display
-
- The large alphanumeric LCD display (2 x 16 characters)
Display Parameters
- Power factor
- Capacitor stages ON/OFF
- Discharging capacitors
- Voltage, current
- KW/KVA/KVAR
- Shortfall or Excess KVAR
- % THD
- Selectable display of 3rd to 13th harmonics
- Selectable display of capacitor values
- Display of settings
- Display of alarm message
Features
- Intelligent with best fit control
- Stages 4 to 16
- Menu driven user friendly handling
- Alarm output
- Easy to install
Selectable Alarm for
- Under compensation
- Over compensation
- Under current
- Over voltage
- Excess Total harmonic distortion (THD).
Control
- Password protection for settings
- Adjustable %KVAR switching capacity
- Adjustable value of Target PF
- Adjustable CT ratio from 1 to 1250
- Adjustable time delay from 1 sec for switching ON insteps for 1 sec
- Models available in 4,6,8,12,14,16 steps
- Adjustable settings for % THD (Total harmonic distortion) protection
- Disconnection in case of low current
- Adjustable number of maximum stages.
- Adjustable lock time for power ON
- Auto identification or Manual feeding of capacitor values
- Manual switching facility
- Test mode facility
- MODBUS communication (Optional)
| Voltage input | 415VAC±15% |
|---|---|
| Current input | –/5A |
| Frequency | 50Hz±5% |
| Over voltage release | 470V±1% |
| Low current | 1% (50mA) |
| Switching contact | 10Amp at 250Vac |
| Switching time | 1 to 1200 sec |
| Switching | Most intelligent (Best Fit) |
| Stages | 6, 8, 12, 14, 16 |
| Accuracy | 1% (±1digit) |
| Target PF | 0.71 Lag to 0.80 Lead |
| Mode | Auto/Manual |
| Dimension | 144mm(L) x 144mm(W) x 80mm(D) |
| Panel cutout | 138 X 138mm |
| Weight | 1Kg |
