SYCON-55 XX
SYCON-55 XX
This 55 series version uses microcontroller technology but with necessary and sufficient features. The main feature is two point setting to avoid hunting at site by user convenience which eliminates calculations and setting of C/K. The switching sequence is in “First In First Out" i.e. FIFO manner. It is very easy to install and its bright 4-digit 7-segment display makes it readable from distance.
Control Features
- Site settable two point target PF
- Capacitor disconnection in case of:
- Low current
- Over voltage
- Test mode facility
General Features
- FIFO Switching
- Friendly user interface
- Easy to install
- Large 4-digit 7-segment display
- Available in 4,6,8,12,16 stages
- Low cost
Display Parameters
- Power factor
- LED indication of capacitor ON/OFF status
Display
- Four Segment Bright LED Display
| Voltage Input | 415V AC +/- 15% |
|---|---|
| Current Input | –/ 5 A –/ 1 A (optional) |
| Frequency | 50 Hz |
| Over Voltage Release | 470 V AC -1% |
| Low current | 1% (50mA) |
| Switching Contact | 10A at 250V AC |
| Accuracy | 1 digit |
| Switching Time | 5 sec |
| Dimensions | 144 (L) x 144 (W) x 80(D) mm |
|---|---|
| Panel Cutout | 138 mm x 138 mm |
| Weight | 1.5 kg |
