SYCON-55 XX-2D
SYCON-55 XX-2D
This 55 series version is similar to SYCON 55 series model of APFC in all respects except the display, the price and the size of the controller. It uses 2-digit 7-segment bright display for power factor indication. Two separate LEDs are used to give LEAD/LAG indication. It is smaller and lighter in weight than the regular SYCON 55 series model. This low cost version is very popular for smaller automatic power factor correction systems.
General Features
- FIFO Switching
- Friendly user interface
- Easy to install
- Large 2-digit 7-segment display
- Available in 4,6 & 8 stages
- Low cost
Display Parameters
- Power factor
- LED indication of LEAD/LAG
- LED indication of capacitor ON/OFF status
- Settings
Control Features
- Site settable two point target PF
- Capacitor disconnection in case of low current
- Test mode facility
Optional Features
- 1 sec switching delay
- –/1A CT input
| Voltage Input | 415V AC -15% |
|---|---|
| Current Input | –/5A |
| Frequency | 50Hz |
| Over Voltage Release | 470V AC -1% |
| Low current | 1.8% (90mA) |
| Switching Contact | 10A at 250V AC |
| Accuracy | 1 digit |
| Switching Time | 5 sec |
| Dimensions | 96(L) x 96(W) x 110(D) mm |
|---|---|
| Panel Cutout | 92 x 92 mm |
