SYCON-62XX
SYCON-62XX
In alternating-current power systems for protection against excessively large currents under short-circuit or transient conditions. The series reactor is connected in series with the line or feeder. Basically reactors are used for fault current reduction, Load balancing in parallel Ckt, limiting inrush current of capacitor bank in APFC panel.
| Order Code | Description | Order Code | Description |
|---|---|---|---|
| Sycon REC 6205 | 5KVAR | Sycon REC 6230 | 30KVAR |
| Sycon REC 6210 | 10kVAR | Sycon REC 6240 | 40KVAR |
| Sycon REC 6215 | 15KVAR | Sycon REC 6250 | 50KVAR |
| Sycon REC 6220 | 20KVAR | Sycon REC 6275 | 75KVAR |
| Sycon REC 6225 | 25KVAR | Sycon REC 6200 | 100KVAR |
General Features
- Single or three phase, high permeable iron core, air gapped design
- High quality copper or aluminium windings
- Linearty according to resonance frequency
- Thermal Switch for overload protection (optional)
- Vacuum impregnated varnish to ensure silent and moisture-immune operation
- Reactors manufactured as per IS 5553/IEC -60289 (1988)
- Insulation class ‘F’
- Temp. rise restricted to class ‘B’ with harmonocs 6-10% above fundamental current.
- Value accuracy within +1.5%
- Tin plated terminals for connections
- Noise level less than 60dB at rated load
- Temperature rise not exceeding 50-55°C above ambient with 10% harmonic currents super imposed.
- Adequate cushion provide to avoid heating due to leakage flux.
- Mechanically sturdy design to withstand vibrations. keep low noise level & ensure performance guarantee
| Output | up to 100 kVAr |
|---|---|
| Filter factor | 5.67% , 7% , 14% |
| Rated Voltage | 440V , 550V , 690V |
- Type C -Detuned, Copper wound -iron core dry type
- Type A -Detuned, Aluminium wound -iron core dry type
Mechanical Specifications of 7 % detuned factor 440VAC rated voltage
| Sr. No. | Value | Dimenssions in mm | ||
|---|---|---|---|---|
| L | D | H | ||
| 1 | 5 kVAr | 202 | 100 | 210 |
| 2 | 10 kVAr | 202 | 108 | 210 |
| 3 | 15 kVAr | 202 | 115 | 210 |
| 4 | 25 kVAr | 242 | 125 | 278 |
| 5 | 50 kVAr | 242 | 125 | 278 |
7 % detuned factor 440VAC rated voltage Aluminium wound.
| Sr. No. | Value | Dimenssions in mm | ||
|---|---|---|---|---|
| L | D | H | ||
| 1 | 5 kVAr | 200 | 200 | 120 |
| 2 | 10 kVAr | 240 | 220 | 145 |
| 3 | 15 kVAr | 240 | 240 | 160 |
| 4 | 25 kVAr | 240 | 255 | 170 |
| 5 | 50 kVAr | 300 | 320 | 190 |
